A tool to extract and upload the file Ariva_TP_PROG.dbs (userdb + defaultdb) software receivers Ariva Ali processor 3602 (A100/200 etc) and Ali 3606 (A102e/202e etc).
After testing, multiple upload the channel list from your backup to the new (or different) with the USB option in the receiver userdb Ali processor 3606
means that the software file userdb, in addition to the list of channels and the tuner can find the remains of a code from the list (reproduced FAV FAV group names, add or remove programs, etc)*
and the receiver ("old" IP adress, DHCP settings, Wi-Fi, etc).
Accumulation of errors may affect the stability of operation of the receiver.

After unpacking the zip file, insert the software folder ripped from the receiver dump,
change the name to backup.abs and then click on Ferguson Firmware Tool v.1 Ariva_TP_PROG.dbs
and follow, instructions.
Every confirm your selection by pressing "ENTER".
Get excavated Pilkers Ariva_TP_PROG.dbs our dump contains a list of channels, set the tuner frequency transponders and their data.
Now grab the new software to our model of the receiver, change its name to backup.abs and insert (override our dump, The folder can not be two files with the same name)
to the folder with the tool.
Click on Ferguson Firmware Ariva_TP_PROG.dbs v.1 and then act according to the instructions contained thereinWhen the tool, we have inserted our list and details of defaultdb to new software and the file to load as allcode + bootloder.
The applet Ferguson Firmware Ariva_TP_PROG.dbs v.1, can be used to upload the tuner channel list, the names of FAV-date transponder data (file defaultdb),
which is a whole software.I upload to the "older version", not each corresponding to the most recent version of the software, the software, the data from the old file defaultdb may already be not quite up to date.